FiberHome S16800 Series Datacenter Switches

S16800-04

S16800-08

S16800-16

FiberHome S16800 series switches (S16800) are next-generation Datacenter switches developed by FiberHome for service providers and enterprise networks. The S16800 provides high density of 10/40/100GE ports, and supports intelligent network optimizations using MPLS, traffic analysis, comprehensive QoS, multicast, load balancing, and security as well as high-performance of Layer 2 to Layer 4 switching. In addition, S16800 adopts high-reliability technologies such as non-stop forwarding, ring protection, redundant control and power supply. It can be deployed in various scenarios, such as core and convergence layer of WANs, MANs, campus networks, and data centers.

Together with Fengine 6900 series switches, Fengine 16800 enables you to build scalable, simplified, open, and secure networks.

Product Appearance

S16800-04	4 power supply slots
	4 service card slots
	2 main control slots
	6 switching slots
S16800-08	8 power supply slots
	8 service card slots
	2 main control slots
	6 switching slots
S16800-16	10 power supply slots
	16 service card slots
	2 main control slots
	6 switching slots

Product Features & Benefits

High Density Interface

The S16800 supports high density interfaces, max 2304 10G,2304 25G, 576 40G, 576 100G ports.

High Switching Capacity

The backplane capacity of S16800 is up to 56T to provide all ports with non-stop forwarding. The S16800 high performance makes sure to build a reliable, sustainable high speed IP networks.

The S16800 supports multi-lever switching; the L2 to L7 flow can be identified, each port support separate packet filtering, so that different control can be applied.

Carrier Grade Reliability

The S16800 adopts redundant design of key components, such as main control, power supply, fan and monitoring. The seamless switching can be achieved via the redundant main control card. All cards are hot swappable to make sure that service could not be interrupted when switchover to redundant parts.

And S16800 provides enhanced Ethernet reliability technologies such as STP/RSTP/MSTP, VRRP, R-link, Ethernet Ring Protection Switching (G.8032) at millisecond-level protection switchover to ensure link-level reliability.

The S16800 also supports 802.1ag, 802.3ah and Y.1731 Ethernet OAM standards and BFD to make sure that it is 99.999% reliable.

Superior Quality of Service

The S16800 supports 802.1p, WRR, SP/PQ+WRR, WRED, DiffServ priorities scheduling to ensure the highest-priority packets are scheduled ahead of all other packets. And it supports L2-L7 flow classifications.

High-Performance IPv6 Service Support

The S16800 supports IPv4/IPv6 dual stack. IPv6 wire-rate processing is achieved by hardware forwarding. And it supports other IPv6 features, such as tunneling, IPv6 static routes, RIPng, OSPFv3, BGP4+, IS-ISv6, and IPv6 PIM, IPv6 ACL. to meet the requirements of independent IP networks and IPv4/IPv6 integrated networks.

Excellent Security Design

The S16800 offers a comprehensive ACL security solution including standard ACL, extended ACL.

And subscriber security are protected by DHCP Snooping, ARP Inspection. IP Source Guard can be used to identify each customer based on MAC, IP address and port information to help prevent malicious attack.

Switch security means CPU can be protected from attack and storm control, such as DOS, etc., the port security feature allows controlling the number of MAC addresses against the overflow of the switch memory and MAC address table.

The S16800 supports IEEE 802.1x authentication to prevent malicious terminals to attack the entire networks.

Product Specifications

Features	S16800-04		S16800-08	S16800-16
Main control slots	2		2	2
Switching slots	6		6	6
Service card slots	4		8	16
Power slots	4		8	10
Switching capacity	46 Tbps		92 Tbps	184 Tbps
Throughput	28,800 Mpps		57,600 Mpps	115,200 Mpps
VLAN	Access, Trunk, Hybrid VLAN, default VLAN
	QinQ, selective QinQ
	PVLAN, super VLAN, voice VLAN
MAC	Dynamic learning and aging of MAC addresses
	Static, dynamic MAC address entries
	Restriction of MAC address learning based on ports and VLANs
STP	STP(IEEE 802.1d)，RSTP(IEEE 802.1w) and MSTP(IEEE 802.1s)
	BPDU protection, root protection, and loop protection
IP routing	IPv4 and IPv6 static routing, GRE, PBR, ECMP
	IPv4 routing protocols, such as OSPF, BGP, and ISIS
	IPv6 routing protocols, such as RIPng, OSPFv3, ISISv6, and BGP4+
Multicast	IGMPv1/v2/v3, IGMP v1/v2/v3 Snooping, IGMP snooping over VPLS, IGMP Proxy
	PIM DM, PIM SM, PIM SSM
	MLD, MSDP
	Fast leave of multicast members
	Multicast traffic control
	Control of multicast packets
	Multicast ACL and multicast duplications
	Multicast VPN
VxLAN	IPV6 VxLAN over IPV4, EVPN VxLAN
EVPN	MP-BGP EVPN(RR), IRB，
Reliability	LACP, RTrunk
	LLDP
	R-LINK, G.8032, 50ms switchover
	M-LAG
	VRRP, BFD for VRRP
	BFD for BGP, IS-IS, OSPF, and Static routing
	Ethernet OAM (802.3ah and 802.1ag)
	ITU-Y.1731
	Redundant power supply
	Fan redundant
	Hot swappable(main control, service card, fan, power supply)
	Main control 1+1 backup, Switching card 1+1 backup
QoS	Traffic classification based on the Layer-2 header, Layer-3
	Information, Layer-4 information, and 802.1p priority
	The actions of ACL, CAR, re-mark, and schedule
	The queue scheduling algorithms of PQ, WRR, DRR, PQ+WRR, and PQ+DRR
	Congestion avoidance mechanisms, such as WRED and tail drop
	Traffic shaping and monitoring
Security and management	802.1x authentication
	RADIUS and TACACS authentication for login users
	Hierarchical protection for commands to prevent unauthorized users from accessing the equipment
	Protection against DoS attack, TCP SYN Flood attack, UDP Flood attack, broadcast storm, and heavy traffic attack
	CPU queues protection
	The ping and tracert functions based on ICMP packets
	RMON
Energy saving	Temperature alarms, and fan speed adjustable
	ALS（Automatic Laser Shutdown）
Configuration and maintenance	Console, Telnet, and SSH terminals
	Network management protocols, such as SNMPv1/v2/v3, NETCONF, telemetry
	Standard MIB
	File uploading and downloading through FTP, TFTP and SFTP
	User operation logs
	Mirroring based on flow or port, IPFIX, NETFLOW, SFLOW
	BootROM upgrade and remote upgrade
	Hot patches
Humidity	5%～85% non condensing
Temperature	(0～45)℃
Input voltage	AC: Rated voltage range:100V to 240V AC, 50/60Hz
	Maximum voltage range:90V to 286V AC, 50/60Hz
	DC:-40V to -72V DC
	HVDC: 190 ~ 400V DC
Chassis dimensions(mm)	443×920×400(9U)	443×920×640(14U)		443×920×1022（23U）
Chassis power supply	< 8000W	< 1000W		< 1200W
Chassis weight	< 35kg	< 45kg		< 60kg